Orme

You should keep the product as tightly closed as possible and close it immediately after use!

PRO TIP: try storing in the the refrigerator!
Lowering the temperature helps prevent some ingredients in the polish from evaporating which can keep formulas from becoming thick and degradation over time.

You will find the full list of ingredients on the “Ingredients” tab of the product description page.

Our ranges are green and clean, made of up to 83% plant-based ingredients, without endocrine disruptors, monomers, or hydroquinone.

The Green™ range is also vegan, certified by the Vegan Society!

Unfortunately not, each formula is unique and made from different ingredients. Our Green Flash™ products should only be used with products from the same range to ensure the best results.

Our Green™ polish is recommended for ages 12+.

It all depends on the thickness of your coats, but if you use our Quick-Dry Drops, you can halve the drying time of your Green™ polish (by 51% to be precise, according to recent studies)!

The nail prep step is a very important way to make sure your polish lasts:

1) File your nails into your preferred shape using our emery board. Use the fine grain (Manucurist logo) for your fingernails and the coarser grain for your toenails.
2) Push back your cuticles. Apply our Cuticle Remover to the nail contour. Leave to work for 2 minutes, then push back the cuticles with a cuticle pusher.
3) File the surface of your nails using our buffer. This is designed to smooth, buff and open up the nail plate to help the polish adhere better.
4) Remove all traces of oil and/or impurities using our Nail Oil Remover to help the polish adhere better and last longer.

Then apply your Green™ polish by following the steps below. Carry out each step on all 10 fingers before moving on to the next step:

1) Apply a thin layer of Base Coat immediately after the Nail Oil Remover.
2) Apply 2 thin coats of colour once the Base Coat is dry. Wait a little while between each coat for it to dry slightly.
3) Apply 1 thin layer of Top Coat.
4) Apply 1 Quick-Dry Drop to the middle of each nail after applying the Top Coat.
Apply the polish in thin coats and wait 1-2 minutes between each coat!

For more tips and personalised advice, book a free virtual consultation with one of our manicure experts here!

If you are wearing Green™ polish, you can reapply a layer of our Sunshine Top Coat to refresh its shine after a few days.

Yes, you can use any of our treatment base coats as part of your Green™ manicure, e.g. S.O.S. Base Coat, Force Base Coat or 5.5 Base Coat. These base coats are designed to strengthen your nails, while helping your Green™ polish to adhere properly.

Our Green™ formula is green and clean: it contains up to 84% plant-based ingredients like cassava, sugar cane and potatoes, and is 9-free (no dibutyl phthalate (DBP), formaldehyde toluene, formaldehyde resin, camphor, triphenyl phosphate (TPHP), xylene, parabens, phthalates or animal-derived ingredients). However, women should avoid all types of nail polish when they are pregnant or breastfeeding. We recommend you speak to a healthcare professional if you are unsure.

Our Green™ formula meets European standards and does not contain any sensitising substances. It is also certified gluten-free and safe for people with gluten intolerance or celiac disease, as are our Green Flash™, Active™ and nail care ranges. Most customers who are allergic to regular nail polish are not allergic to Green™ nail polish. However, as allergic reactions are not specifically linked to chemical ingredients, they can sometimes occur with plant-based ingredients. We recommend you speak to a healthcare professional if you are unsure.

For more information, see our blog on allergies.