Poppy Red

ethyl acetate, butyl acetate, nitrocellulose, hydroxyethyl acrylate/IPDI/PPG-15 glyceryl ether copolymer, acetyl tributyl citrate, isopropyl alcohol, bis-HEMA poly(1.4-butanediol)-9/IPDI copolymer, stearalkonium bentonite, ethyl trimethylbenzoyl phenylphosphinate, phosphoric acid, diacetone alcohol, BHT, silica, CI 15850 (red 7 lake), CI 73360 (red 30), CI 77491 (iron oxides), CI 77891 (titanium dioxide), CI 19140 (yellow 5 lake)

58% bio-sourced

Step 1 - Prepare the nail

Remove any oil with Green Flash Nail Polish Remover.

Step 2 - Base coat

Apply Green Flash Base Coat remembering to cap the edge and cure under the Green Flash 18W LED Lamp for 2 minutes.

Step 3 - Colour

Apply your favourite Green Flash colour remembering to cap the edge and cure under the Green Flash 18W LED Lamp for 2 minutes. Repeat step 3 so you have 2 thin coats of colour.

Step 4 - Top coat

Apply Green Flash Top Coat remembering to cap the edge and cure under the Green Flash 18W LED Lamp for 3 minutes.

Watch the video for perfect application every time:

...and perfect removal!

Can I mix two ranges (e.g. Green Flash and Green)?

No, each formula is unique and made up of different ingredients. So you should never mix them.

How do I prepare my nails?

You should file your nails and remove any oil with Green Flash Nail Polish Remover or another gentle nail polish remover.

How do I cap the nail?

Once the colour is on, carefully pass the brush over the edge of the nail without adding more product.

What is the right way to remove Green Flash polish?

Soak a cotton pad with Green Flash Nail Polish Remover and leave it on the nail for a few minutes. Rub to remove the polish. If any base coat is left, repeat the step.

Can pregnant women use Green Flash nail polish?

Pregnant women should avoid all types of nail polish. However, our product ranges are green and clean and up to 84% of their ingredients are bio-sourced. They also contain no endocrine disruptors, monomers or hydroquinone.

Can I use Green Flash without the LED lamp?

No, Green Flash polish needs the lamp to cure.

Can I use another lamp?

We recommend you use an LED lamp with an output of at least 18W. Make sure you adjust the curing time if your lamp is more powerful.

ethyl acetate, butyl acetate, nitrocellulose, hydroxyethyl acrylate/IPDI/PPG-15 glyceryl ether copolymer, acetyl tributyl citrate, isopropyl alcohol, bis-HEMA poly(1,4-butanediol)-9/IPDI copolymer, stearalkonium bentonite, CI 73360 (red 30), ethyl trimethylbenzoyl phenylphosphinate, silica, diacetone alcohol, CI 15850 (red 7 lake), CI 77891 (titanium dioxide), BHT, CI 77491 (iron oxides), phosphoric acid, CI 19140 (yellow 5 lake) 
Bio-sourcés à 58%