Glitter Top Coat

Green Flash™ application is easy for all skill levels, especially beginners!

If you know how to apply regular nail polish, you'll know how to apply Green Flash™: base coat, color, and top coat. The only difference is curing under the lamp!

If you're used to applying gel polish, keep a few things in mind: Green Flash™ application is more like regular nail polish—there is no need to wipe away an inhibition layer, and unlike gel, the polish isn't workable once applied, so you need to get the technique right from the start.

We recommend applying it just like regular nail polish—except you cure it under the lamp to dry!

Unfortunately not, each formula is unique and the compositions differ. Green Flash™ products must therefore always be used only with Green Flash™ products to guarantee results. At a minimum, you need:

• A Green Flash™ base coat
• A Green Flash™ colour
• A Green Flash™ top coat
• An LED lamp of at least 24W

For controlled removal, we strongly recommend using Green Flash™ bio-based Nail Polish Remover along with the matching clips.

Please note:
Using a Green Flash™ colour with a base and top coat from another semi-permanent or regular nail polish brand will not work.
Using a Green Flash™ base coat with a colour and top coat from another semi-permanent or regular nail polish brand will not work.
etc.

The Green Flash™ formula is compliant with European regulations and contains no sensitising substances such as methylacrylate monomers, HEMA, acrylate, titanium or nickel found in many classic semi-permanent nail polish formulas. It is also certified gluten-free and safe for people who are gluten-intolerant or coeliac, just like the Green™, Active™ and care ranges. The majority of customers who have experienced allergies with classic semi-permanent nail polishes do not experience them with Green Flash™ nail polish. Nevertheless, as allergic reactions are not specifically linked to chemical ingredients, they can sometimes occur with bio-sourced ingredients. If in doubt, we invite you to consult your doctor.

The Xtrem Flash™ top coat, has been formulated in strict compliance with European cosmetic regulations, among the most stringent in the world. As with any gel, reactions can however occur in people who are already sensitised, most often due to poorly cured residues or product overflowing onto the skin. To minimise this risk as much as possible, we guide our customers with a precise application protocol: apply thin layers, remove any overflow onto the cuticles before curing, and cure the thumbs separately to avoid product movement. This guidance ensures a worry-free experience with our top coat.

For more information, we recommend reading our blog article about allergies.

Green Flash™ Gold and Silver Glitter Top Coats occasionally replace the classic Green Flash™ Top Coat to enhance all your Green Flash™ manicures with a delicate golden or silver veil. They bring new radiance to your shades, for a gel-effect shine and wear time of up to 12 days, while ensuring gentle, acetone-free removal in 1 minute.

They can be applied over all Green Flash™ shades, but look their best over dark or deep shades. Try them over Hollyhock, Dark Night or Red Cherry for an even more luminous golden or silvery effect.

The Green Flash™ Gold and Silver Glitter Top Coat cure under an LED lamp using the Top Coat setting (compatible with 18W, 24W, 36W, or 48W). They are dry immediately afterwards. We still recommend avoiding any contact or friction for the following 5 minutes to prevent damaging your manicure.